ELECTRONIC SPACE PRODUCTS INTERNATIONAL

1050 Benson Way, Ashland, OR 97520

Toll Free (800) 638-2581 * Fax (541) 488-8313

E-Mail: sales@espimetals.com

Inconel 600

              Inconel 600 is a nickel-chromium alloy with good oxidation resistance at high temperatures and resistance to chloride ion stress-corrosion cracking, corrosion by high-purity water, and caustic corrosion. Used for furnace components, in chemical and food process-ing, in nuclear engineering, and for sparking electrodes.

Typical Analysis in Percent:

              Ni (+Co):             72                        Cr:                       14 - 17

              Fe:                       6 - 10                   C:                         .15

              Mn:                      1                          Si:                        .5

              Cu:                       .5

Physical Properties:

Density: 8.47 g/cm³

Melting Point/Range: 1355 - 1413 ^oC (2470 - 2575 ^oF)

                                                                                      J/kg ⋅ K                             Btu/lb ⋅ ^oF

Specific Heat:                                                              444                                     0.106

                                                                                      µm/m ⋅ K                           µin/in ⋅ K

Average Coefficient of Thermal Expansion:            13.3                                    7.4

                                                                                      W/m ⋅ K                            Btu ⋅ in./ft² ⋅ h ⋅ ^oF

Thermal Conductivity:                                               14.9                                    103

                                                                                      % IACS                            nΩ ⋅ m

Electrical Resistivity:                                                  1.7                                      1030

Magnetic Permeability: 1.010

Curie Temperature: -124 ^oC (-192 ^oF)

Typical Mechanical Properties:

At Room Temperature:

                            Ultimate Tensile                 Yield Strength                Elongation in                  Elastic Modulus

                                Strength                            (0.2 % offset)                  50 mm (2")                     (Tension)

                            MPa             ksi                  MPa        ksi                             %                            GPa        10⁶ psi

                            655               95                   310          45                              40                            207           30

Hardness: 75 HRB