High Purity Metal Specialists
Home | Contact Us  (800) 638-2581 - sales@espimetals.com
Company Profile | Online Catalog | Technical Data | MSDS's | Ordering  Information | FAQ

 

 

CERIUM (Ce)

 

MATERIAL OVERVIEW

Characteristics: Gray, ductile, highly reactive metal. Attacked by dilute and concentrated mineral acids and by alkalies. Readily oxidizes in moist air at room temperature. It has four allotropic forms. It is the second most reactive rare-earth metal. Cerium forms alloys with other lanthanides, it also forms a nonmetal with hydrogen, as well as carbides and intermetallic compounds. Decomposes in water; nontoxic.

Derivation: Chemical processing and separation of ores.

Hazard: May ignite on heating to 300 oF (148.9 oC). Strong reducing agent.  

 

GENERAL PROPERTIES

Symbol:

Ce

Atomic Number:

58

Atomic Weight:

140.12

Density:

6.657 gm/cc

Melting Point:

799 oC

Boiling Point:

3426 oC

Thermal Conductivity:

0.113/cm/oK @ 298.2 oK

Electrical Resistivity:

75.0 microhm-cm @ 25 oC

Electronegativity:

1.1 Paulings

Specific Heat:

0.049 Cal/g/oK @ 25 oC

Heat of Vaporization:

95 K-cal/gm atom at 3426 oC

Heat of Fusion:

2.12 Cal/gm mole

Thermal Neutron Cross Section:

0.7 Barns per Atom

Magnetic Susceptibility:

700 x 10-6 Emu Room Temp

Magnetic Moment:

2.4 Bohr Magnetons

Temperature Coefficient of Resistance:

 

.7 x 10-5 @ 0 oC to Room Temp

TYPICAL ANALYSES

Impurities in ppm

Material / Purity:

3N

La

<500

Nd

<500

Al

<100

Ca

<100

Y

<100

Fe

<100

Mg

<100

Si

<100

Ni

<100

Pr

<500

 

CERIUM ROD

Material

Purity

Cerium Rod .125”

3N

Cerium Rod .250”

3N

Cerium Rod .500”

3N

Cerium Rod .625”

3N

Cerium Rod .750”

3N

Cerium Rod 1”

3N

Additional diameters can be manufactured in 7-10 days.
Rod is cut to order and sold by the inch.  

CERIUM FOIL

Material

Purity

Cerium Foil .001”

3N

Cerium Foil .002”

3N

Cerium Foil .003”

3N

Cerium Foil .004”

3N

Cerium Foil .005”

3N

Cerium Foil .006”

3N

Cerium Foil .007”

3N

Cerium Foil .008”

3N

Cerium Foil .009”

3N

Foil is cut to order and sold by the square inch or square foot.  

CERIUM SHEET

Material

Purity

Cerium Sheet .010” to 0.5”

3N

Sheet thicknesses are available in increments of .001”.
Sheet is cut to order and sold by the square inch.  

CERIUM SPUTTERING TARGETS

Material

Purity

Cerium Sputtering Target 2"D X .125"T

3N

Cerium Sputtering Target 2"D X .250"T

3N

Cerium Sputtering Target 3"D X .125"T

3N

Cerium Sputtering Target 3"D X .250"T 

3N

Cerium Sputtering Target 4"D X .125"T

3N

Cerium Sputtering Target 4"D X .250"T

3N

Additional sizes and sputtering targets produced from compounds are available
upon request.  

CERIUM POWDER, SHOT, PELLETS, & INGOT

Material

Purity

Cerium Shot 3-12mm

3N

Cerium Pellets  .250"D X .125"L

3N

Cerium Pellets .250"D X .250"L

3N

Cerium Ingot 

3N

Cerium Powder -40 Mesh, Under Oil

3N

Cerium Powder -40 Mesh, Ampoules under dry argon

3N

Cerium Powder -40 Mesh, Cans under dry argon 3N

Powder, shot, pellets, and ingots are packaged to order and sold by the gram or kilogram.  

CERIUM COMPOUNDS

Material

Purity

Cerium Boride CeB6 -325 Mesh 3N

2N5

Cerium Carbide CeC2 1/4" Pieces by Down 2N5

2N

Cerium Fluoride CeF3 1/4" to 1/8" Pieces

3N

Cerium Fluoride CeF3 -60 Mesh

3N

Cerium Fluoride CeF3 -325 Mesh

3N

Cerium Oxide CeO2 -325 Mesh

3N 5N

Cerium Oxide CeO2Tablets

3N

Cerium Oxide CeO21/4"-1/8" Pieces

3N

Cerium Oxide CeO2 -150 +325 Mesh

2N5

Cerium Oxide CeO2 -325 Mesh +10 Microns

2N5

Cerium Oxide CeO2 -100 Mesh

3N

Cerium Sulfide CeS 1/8" Pieces by Down

3N

Cerium Sulfide CeS -325 Mesh

3N

Cerium Sulfide Ce2S3 -325 Mesh

3N

Cerium Titanate CeO2+TiO2 -325 Mesh

3N

Cerium Zirconate CeO2+ZrO2 -325 Mesh

2N5

Compounds are packaged to order and sold by the gram or kilogram.

Material Safety Data Sheet - MSDS

Cerium MSDS

Technical Data Sheets

 Cerium Oxide (Rareox 90)
Understanding Mesh Sizes

 

 

Last updated:

Copyright 2002 | ESPICorp Inc.